View source for Translations:WB-MIO Modbus Interface Converters/5/en

[[File:DIN 2U.png |300px|thumb|right|overall dimensions]]
{| class="wikitable"
! style="text-align: center;" | Option
! style="text-align: center;" | Value
|-
! colspan="2" |Power
|-
|Supply voltage front-end
|9 V — 24 V DC
|-
|Power consumption
|
0.85 W
|-
!colspan="2" | '''Terminals and wire section''' 
|-
|| Recommended wire cross-section, mm<sup>2</sup>|| 0,75 — 1
|-
|| Length of the standard sleeve, mm || 8
|-
|| Torque of screws, N∙m || 0,2
|-
! colspan="2" |Communication
|-
|Communication protocol
|Modbus RTU, WBIO
|-
|Interfaces
|
* RS-485
* Ethernet 10/100 (only in '''WB-MIO-E''')
|-
|RS-485 interface parameters
|set programmatically, by default:
speed 9600 bps; data bits 8; parity N; stop bits 2;
*Speed: 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200 bit/s <br>([[UART_Communication_Settings|configure RS-485 communication parameters for wiren Board modbus devices]])
*Data: 8 bit 
*Parity check: none (default), 1 - odd (odd), 2 - even (even) 
*Stop bits: 2 (default), 1