Module of analog outputs WBIO-AO-10V-8 I/O
Внимание: Отображаемое название «Module of analog outputs WBIO-AO-10V-8 I/O» переопределяет ранее заданное отображаемое название «WBIO-AO-10V-8 I/O Module». Buy online
The module is designed for industrial and home automation systems and is used to control 0 — 10 V servos or dimmers.
Design
The module contains 8 analog outputs with adjustable voltage from 0 to 10 V. Currently does not work with WB-MIO interface Converter.
Specifications
| Parameter | Value |
|---|---|
| Number of outputs | 8 |
| Output type | voltage output |
| Galvanic isolation | group, from controller circuits, 1 kV |
| Output voltage | 0...10 Volts |
| Permissible load resistance | >2000 Ohms |
| Other | |
| Module type | "O" (non-inverted address scheme) |
| Maximum power consumption | 0.3 W |
| Width, DIN units | 2 |
| Overall dimensions (l x W x H) | 36.30 x 90.2 x 57.50 mm |
| Terminals and wire section | |
|---|---|
| The recommended wire cross section with pin bushing insulated tip, mm2 | 0,75 — 1 |
| Standard sleeve length of pin bushing insulated tip, mm | 8 |
| Tightening torque of screws, Н∙м | 0,2 |
Connection to controller
See section activating the module in the web interface of the controller.
Web interface view
Using the sliders, you can set the voltage from 0 to 10 V on each channel, the voltage is set in millivolts.
Device pictures and drawings
По ссылкам ниже вы можете скачать изображения и чертежи устройства WBIO-AO-10V-8.
Corel Draw 2018: WBIO-AO-10V-8.cdr.zip
Corel Draw PDF: WBIO-AO-10V-8.cdr.pdf
Autocad 2013 DXF: WBIO-AO-10V-8.dxf.zip
Autocad PDF: WBIO-AO-10V-8.pdf