Translations:WB-MIO Modbus Interface Converters/5/en

overall dimensions

Option	Value
Power
Supply voltage front-end	9 V — 24 V DC
Power consumption	0.85 W
Terminals and wire section
Recommended wire cross-section, mm2	0,75 — 1
Length of the standard sleeve, mm	8
Torque of screws, N∙m	0,2
Communication
Communication protocol	Modbus RTU, WBIO
Interfaces	RS-485 Ethernet 10/100 (only in WB-MIO-E)
RS-485 interface parameters	set programmatically, by default: speed 9600 bps; data bits 8; parity N; stop bits 2; Speed: 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200 bit/s (configure RS-485 communication parameters for wiren Board modbus devices) Data: 8 bit Parity check: none (default), 1 - odd (odd), 2 - even (even) Stop bits: 2 (default), 1