Translations:I/O Mapping Matrix/9/en

From Wiren Board

-->

back
00 01 10 11
front
 00 Mm 0000.png
(0) — Input is disabled, does not control outputs 		Mm 0001.png
(1) — Disable when opening circuit 		Mm 0010.png
(2) — Enable when circuit is open 		Mm 0011.png
(3) — Change the exit status when closing
01 Mm 0100.png
(4) — Turn off when snapping 		Mm 0101.png
(5) — Always turn off 		Mm 0110.png
(6) —Work as an inverted
safety switch with separate actuator 		Mm 0111.png
(7) — Turn off when opening, then
change state when switching
10 Mm 1000.png
(8) — Turn on when the circuit is closed 		Mm 1001.png
(9) — To work like locking swich
(repeat sign) 		Mm 1010.png
(10, 0x0A)— Always turn on 		Mm 1011.png
(11, 0x0B) — Enable, then change the
state when opening
11 Mm 1100.png
(12, 0x0C) — To change the output state
in short
("'non-latching switch"') 		Mm 1101.png
(13, 0x0D) — Change state, then
turn off when opening 		Mm 1110.png
(14, 0x0E) — Change state, then
turn off when circuit is open 		Mm 1111.png
(15, 0x0F) — Change the state when closing
and return to the original state
when opening
Retrieved from "https://wiki.wirenboard.com/wiki/index.php?title=Translations:I/O_Mapping_Matrix/9/en&oldid=31073"